RTS EKP-32, Инструкция пользователя

Страница: 31 / 120

KP-32 User Manual Basic Operation 19
Bosch Security Systems, Inc. User Manual F.01U.193.253 Rev. 16
Operation of Intercom Talk Keys with the Speaker DIM Setting
Activating any talk key causes the speaker or headphone volume at this keypanel to diminish by the amount specified in the
Dim menu item on the Service menu.
NOTE: Do not confuse this with the Talk+DIM auto function previously described. Talk+DIM affects the speaker or
headphones on other keypanels when a particular talk key is activated on this keypanel. Speaker DIM affects the
speaker or headphone level on this keypanel when any talk key on this keypanel is activated.
Operation of Intercom Keys assigned to TIF Ports
If an intercom key is assigned to talk to an intercom port that is designated as a TIF port in AZedit, placing the key in the talk
position activates the KP-32 dialing menu. See “Telephone Operation” on page 21, for further information.
NOTE: You designate an intercom port as a TIF port by checking the Port is TIF check box in AZedit. (In AZedit, click
the KP button on the toolbar to access Keypanels / Ports setup, then select the intercom port where the TIF is
connected. Click the Edit button, then click the Advanced tab. Place a check next to Port is TIF. Remember to
send the change to the intercom system.)
Muting the Microphone
> Tap the MUTE key to turn microphone muting ON or OFF.

The Vol. Sel. display alternates between Hdst and Mute (or between Spkr and Mute) while the microphone is muted.
NOTE: While muting is on, you cannot be heard on the intercom, or by anyone on the telephone, or by any device
connected to the mic preamp output of the optional connector module.
Call Waiting Operation
Occasionally, a keypanel may call, and there won't be a key assigned to talk back to that caller. In this case, the caller's name
appears in the
Call waiting window. Press down and hold the Call waiting key to talk back.
To clear a name from the Call waiting window, tap UP on the Call waiting key.
If a second call is received in the Call waiting window while a caller name is already displayed, the Call waiting LED flashes
red. To answer the second call, tap up to clear the first name, then hold the key down to talk to the second caller.
NOTE: By default, only the names of callers who are not currently assigned to intercom keys appears in the Call waiting
window. Alternatively, you can force all caller names to display in the Call waiting window. This is controlled
either by DIP switch 2 on the ADAM Master Controller card or by the AZedit check box titled Always Stack
Callers In Call Waiting Window . (AZedit Options menu, Intercom Configuration, Options tab. Note: the setting
in AZedit overrides the DIP switch 2 setting on the Master Controller card.) If your intercom system has mostly
keypanels with alphanumeric displays, we recommend that you do not stack all callers in the
Call waiting
window.