RTS DKP-4016, Техническое руководство

Страница: 228 / 282

228 DKP-4016 Menu System DKP-4016
Bosch Security Systems, Inc. Technical Manual F.01U.308.248 Rev. 03
3.
Using the arrow buttons,

select Retain .
4.
Press the SEL button .
An arrow appears next to Retain.
Service Menu, Intercom Mode
The Intercom Mode menu is used to select the type of firmware you have in your intercom so the keypanel can display alphas
in the correct font/language and modify the behavior of some functions to match the intercom behavior.
Available options are Alternate and Standard .
NOTE: Standard mode is the default and should be used in most cases. Alternate mode is primarily used for intercoms
running Japanese firmware.
To select the intercom mode , do the following:
1.
Starting at the Service|Intercom Mode menu, select Alternate or Standard .
An arrow appears next to selected option .
2.
Press the SEL button .
The selections Cancel and Save and Restart appear.
3.
Using the arrow buttons, select Cancel to cancel out of the action.
OR
Using the arrow buttons, select
Save and Restart to save the changes.
4.
Press the SEL button .
Service Menu, Key View
The Key View menu is used to configure the keypanel keys to show key crosspoint gains, show listen assignments, or show
the matrix for each key assignment.
NOTE: Show Lstn and Show Mtx are mutually exclusive options. Only one (1) of these options may be enabled at a
time.
Available options for this menu are:
Show Gain The crosspoint gain bar graph for each key is shown below the talk assignment.
Show Lstn The listen assignment for each key is shown above the talk assignment.
Show Mtx The matrix name for each key assignment is shown above the talk assignment.
IMPORTANT: When the keypanel is configured for 8 Char or 8 Char (Unicode), none of these options are available.
To configure the Key View , do the following:
1.
Starting at the Service menu, select Key View .
2.
Press the SEL button .
Show Gain, Show Lstn, and Show Mtx appear in the panel display.
3.
Using the left and right arrow buttons, select Show Gain to show gain on the key display.
OR
Using the left and right arrow buttons, select
Show Lstn to show listen assignments on the key display.
OR
Using the left and right arrow buttons, select
Show Mtx to show the matrix assignments on the key display.
4.
Press the SEL button .
Disabled and Enabled appear in the panel display .