RTS DKP-4016, Техническое руководство

Страница: 159 / 282

DKP-4016 Firmware Download 159
Bosch Security Systems, Inc. Technical Manual F.01U.308.248 Rev. 03
Display the FPGA Version on the Keypanel
To display the FPGA version currently installed in the keypanel , do the following:
1.
While pressing the Main Vol and Aux Vol encoders on the front of the keypanel at the same time, press the MENU
button .
The main menu appears in the panel display.
2.
Using the left and right arrow buttons, select Service .
3.
Press the SEL button .
The Service menu options appear in the panel display .
4.
Using the left and right arrow buttons, select FPGA Version .
5.
Press the SEL button .
Version X.X.X (where X represents the FPGA version numbers) appears in the panel display.
Download and Upgrade the FPGA to the DKP-4016/4016W
There are four (4) phases to upgrading the FPGA on a keypanel:
•
Downloading the FPGA firmware to the matrix
•
Downloading the FPGA firmware to the keypanel
•
Processing the download
•
Reprogramming the keypanel
To download the FPGA to the keypanel , do the following:
1.
Open AZedit .
2.
From the Status menu, select Software Versions|Keypanels.
The Keypanel Version Information window appears.
3.
Find the port number where the DKP-4016/4016W is assigned.
4.
Highlight the Port (keypanel) to be updated.
You may select more than one (1) at a time by holding CTRL key down while you select.
5.
Right-click the highlighted selections .
A popup menu appears.
6.
Select Download Firmware .
The Firmware Download window appears .
7.
Using the browse button, navigate to the FPGA file you want to use.