RTS DKP 16 CLD, Руководство пользователя

Страница: 142 / 232

132 KP 32 CLD Menu System KP32CLD
Bosch Security Systems, Inc. User Manual F.01U.193.294 Rev. 10
Backlight
Available selections for this field are:
Activate (default) When Activate is selected, the backlight activates when the user presses any keypad key
on the keypanel. Note, this action is not part of the key sequence, but simply a way to activate the
backlight on the keypad.
Always Off The keypad backlight is always off .
Always On The keypad backlight is always on.
NOTE: When the keypanel menu is not active, the backlight stays lit for five (5) seconds of inactivity before shutting off.
However, when the keypanel menu is active, the backlight stays lit for one (1) minute before exiting the menu
system and shutting off. Using Activate as your setting can prolong the lifetime of the backlight for the keypanel.
To set the keypad backlight option , do the following:
1.
On the KP 32 CLD keypad, press MENU .

The Top Level menu appears .
2.
Using the 3(

) or 6(

), select Service .
3.
Press the SEL button.

The Service submenu appears in the display window.
4.
Using the 3(

) or 6(

), select Keypad .
5.
Press the SEL button.

Backlight and Sequences appear in the display window .
6.
Using the 3(

) or 6(

), select Backlight
7.
Press the SEL button.

Activate (default), Always Off, and Always On appear in the display window .
8.
Using the 3(

) or 6(

), select Always On to have the keypad backlight always on.

OR

Using the 3(

) or 6(

), select Always Off to have the keypad backlight never on

OR

Using the 3(

) or 6(

), select Activate to have the keypad turn on when the keypad is pressed.
Service Menu, Local GPIO
Local GPIO is used to assign GPIO inputs and outputs. You can only use this option if your KP 32 CLD has an optional
Connector Module. Inputs can be assigned to activate intercom keys (including group master keys and a solo key). Outputs
can be activated by intercom keys.
NOTE: This feature is only enabled if the GPI 32 CLD option card is installed.
NOTE: The DKP 16 CLD has only three (3) Opto Connectors available.