RTS BP-6000, Техническое руководство

Страница: 23 / 32

Universal Beltpack – BP-6000 Initial Setup and Configuration 23
Incoming Call Beep Menu
The Incoming Call Beep menu is used to enable and disable whether a beep is heard in the headset when
a call comes into the beltpack.
Available options are On or Off .
The default for this menu is Off .
To configure incoming call beep , do the following:
1.
While in the program menu, navigate to Incoming Call Beep .
[voice prompt] “Incoming Call Beep”.
2.
Press the TALK button to enable Incoming Call Beep.
[voice prompt] “Off”.
OR
Press the
TALK button to disable Incoming Call Beep.
[voice prompt] “On”.
3.
Exit the Program Menu (see “Exit Program Menu” on page 19).
Channel Lock Menu
The Channel Lock menu is used to program whether the BP-6000 has access to one or two channels.
When channel lock is used, the beltpack only operates on the locked channel. For example, if channel 1 is
locked, the beltpack only operates on channel 1.
Available options are Channel 1, Channel 2 or Off .
The default for this menu is Off .
To configure channel lock , do the following:
1.
While in the program menu, navigate to Channel Lock .
[voice prompt] “Channel Lock”.
2.
Press the TALK button to select Channel 1.
[voice prompt] “Channel 1”.
OR
Press the
TALK button again to select Channel 2.
[voice prompt] “Channel 2”.
OR
Press the
TALK button again to select Off.
[voice prompt] “Off”.
3.
Exit the Program Menu (see “Exit Program Menu” on page 19).