2 ADAM CS Installation Manual
PROPRIETARY NOTICE
The RTS product information and design disclosed herein
were originated by and are the property of Telex Commu-
nications, Inc. Telex reserves all patent, proprietary
design, manufacturing, reproduction, use and sales rights
thereto, and to any article disclosed therein, except to the
extent rights are expressly granted to others.
COPYRIGHT NOTICE
Copyright 1997 by Telex Communications, Inc. All rights
reserved. Reproduction in whole or in part without prior
written permission from Telex is prohibited.
UNPACKING AND INSPECTION
Immediately upon receipt of the equipment, inspect the
shipping container and the contents carefully for any dis-
crepancies or damage. Should there be any, notify the
freight company and the dealer at once.
WARRANTY INFORMATION
RTS products are warranted by Telex Communications,
Inc. to be free from defects in materials and workmanship
for a period of three years from the date of sale.
The sole obligation of Telex during the warranty period is
to provide, without charge, parts and labor necessary to
remedy covered defects appearing in products returned
prepaid to Telex. This warranty does not cover any
defect, malfunction or failure caused beyond the control
of Telex, including unreasonable or negligent operation,
abuse, accident, failure to follow instructions in the Serv-
ice Manual or the User Manual, defective or improper
associated equipment, attempts at modification and
repair not authorized by Telex, and shipping damage.
Products with their serial numbers removed or effaced
are not covered by this warranty.
To obtain warranty service, follow the procedures entitled
"Procedure For Returns" and "Shipping to Manufacturer
for Repair or Adjustment".
This warranty is the sole and exclusive express warranty
given with respect to RTS products. It is the responsibility
of the user to determine before purchase that this product
is suitable for the user's intended purpose.
ANY AND ALL IMPLIED WARRANTIES, INCLUDING
THE IMPLIED WARRANTY OF MERCHANTABILITY
ARE LIMITED TO THE DURATION OF THIS EXPRESS
LIMITED WARRANTY.
NEITHER TELEX NOR THE DEALER WHO SELLS RTS
PRODUCTS IS LIABLE FOR INCIDENTAL OR CONSE-
QUENTIAL DAMAGES OF ANY KIND.
CUSTOMER SUPPORT
Technical questions should be directed to:
Customer Service Department
RTS/Telex,
2550 Hollywood Way, Suite 207
Burbank, CA 91505 U.S.A.
Telephone: (818) 566-6700
Fax: (818) 843-7953
RETURN SHIPPING INSTRUCTIONS
PROCEDURE FOR RETURNS
If a repair is necessary, contact the dealer where this unit
was purchased.
If repair through the dealer is not possible, obtain a
RETURN AUTHORIZATION from:
Customer Service Department
Telex Communications, Inc.
Telephone: (800) 828-6107
Fax: (800) 323-0498
DO NOT RETURN ANY EQUIPMENT DIRECTLY TO
THE FACTORY WITHOUT FIRST OBTAINING A
RETURN AUTHORIZATION.
Be prepared to provide the company name, address,
phone number, a person to contact regarding the repair,
the type and quantity of equipment, a description of the
problem and the serial number(s).
SHIPPING TO MANUFACTURER FOR REPAIR OR
ADJUSTMENT
All shipments of RTS products should be made via United
Parcel Service or the best available shipper, prepaid. The
equipment should be shipped in the original packing car-
ton; if that is not available, use any suitable container that
is rigid and of adequate size. If a substitute container is
used, the equipment should be wrapped in paper and
surrounded with at least four inches of excelsior or similar
shock-absorbing material. All shipments must be sent to
the following address and must include the Return
Authorization.
Factory Service Department
Telex Communications, Inc.
8601 E. Cornhusker Hwy.
Lincoln, NE 68505 U.S.A.
Upon completion of any repair the equipment will be
returned via United Parcel Service or specified shipper
collect.
