9/23
Проверил: Р.Ч./19.03.2015г
●
Cover screw threads or similar parts of the target object.
●
It is advisable to test the spray gun on cardboard or a similar surface to find the correct setting.
Important: Begin spraying outside of the target area and avoid interruptions inside the target
area.
●
Correct (Fig. 1 a)
Be sure to hold the spray gun at an even distance of approx. 2.5- 30 cm to
the target object.
●
Incorrect (Fig. 1 b)
· Heavy spray fog build-up, uneven surface quality.
●
An even movement of the spray gun results in an even surface quality.
●
When coating material builds up on the nozzle (A) and air cap (B)
(Fig.2)
, clean both parts
with a solvent or water.
Interruption of Work
●
Turn the machine off.
●
Put the spray gun in the spray gun holder.
Taking Out of Operation and Cleaning
1. Turn the machine off. Activate the trigger guard so that the coating material in the spray gun
flows back into the container.
2. Unscrew the container. Empty any remaining coating material back into the material tin.
3. Pre-clean the container and feed tube with a brush.
Fig 1
Fig 2
a
b
A
B
2.5-30cm
