background image

16 

 

Environmental Conditions 

 

The modules are rated for the following environmental conditions: 

Specification Type 

Recommended Range 

Test Specification 

Operating Temperature 

-20 ºC to 60 ºC 

IEC 60068-2-30, Db 
RTP Type Testing 

Operating Temperature Change 

10 ºC/minute 

IEC 60068-2-14 Test Nb 

Operating Humidity 

10% to 95% non-condensing 

IEC 60068-2-30, Db 

Storage Temperature 

-40 ºC to 85 ºC 

IEC 60068-2-1 Tests Ab, Ad 
IEC 60068-2-2 Tests Bb, Bd 
RTP Type Testing 

Storage Temperature Change 

10 ºC/minute 

IEC 60068-2-14 Test Na 

Storage Humidity 

0% to 100% condensing 

IEC 60068-2-30, Db 

Vibration 

9 Hz to 150 Hz at 1 g 

IEC 60068-2-6, Fc 

Mechanical Shock 

15 g for 11 milliseconds 

IEC 60068-2-27, Ea 

Electrostatic Discharge Immunity  ±6 kV contact 

IEC 61000-4-2 

Radiated E-Field Immunity 

80 MHz to 1 GHz at 20 V/m 
1 GHz to 2.1 GHz at 10 V/m 
2.1 GHz to 2.5 GHz at 5 V/m 
2.5 GHz to 2.7 GHz at 1 V/m 

IEC 61000-4-3 

Ethernet Line Burst Immunity 

±2 kV 

IEC 61000-4-4 

Ethernet Line Surge Immunity 

±2 kV 

IEC 61000-4-5 

Ethernet Line Conducted RF 
Immunity 

150 kHz to 80 MHz at 10 V 

IEC 61000-4-6 

Pulsed Magnetic Field 

300 A/m 

IEC 61000-4-9 

 

Modules can be ordered with optional HumiSeal© conformal coating.  In this case, the modules 
can be installed in G3 harsh environmental conditions as defined in standard ISA

–S71.04–1985. 

 

This equipment has been tested and found to comply with the limits for a Class A digital device, 
pursuant to Part 15 of FCC Rules.  These limits are designed to provide reasonable protection 
against harmful interference when the equipment is operated in a commercial environment.  This 
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used 
in accordance with the instruction manual, may cause harmful interference to radio 
communications.  Operation of this equipment in a residential area is likely to cause interference 
in which case the user will be required to correct the interference at his own expense. 
 
This Class A digital apparatus complies with Canadian ICES-003. 

Cet appareil numérique de la Classe A est conforme à la norme NMB-003 du Canada. 

 

Содержание SC3015


















Отзывы: