17
7. Reconnect all Ethernet cables and set DIP SW2-1 on the 3200T/3201 Processor card (see Figure 2)
back to its OFF position (if changed in step 3) and power-cycle the 3200T/3201 Processor.
8. Download the user application program (
with the correct I/O Configuration
) from NetArrays. From
the Device Status window, verify that the user application program is running.
9.
For redundant configurations reconnect the Ethernet cables and turn the power on at the “B”, “C” and
“D” Node Processors. The configuration parameters will be transferred to the redundant processors.
Configuration Parameters
Use the Device Configuration Editor to change the configuration parameters from their default settings. To
change an entry, move the mouse pointer to the parameter, select it, and type the new value. When finished,
click on the Download button to write the configuration file to the target device. The
VIK2K1.CFG
configuration
file parameters are:
ipaddress, ipaddress_b, ipaddress_c, ipaddress_d, ipaddress_e
