Realtimes Beijing Technology Co.,LTD
www.realtimes.cn/en/index.html
RTSS-X502N Reference Manual V1.0
9
3 Installation and use
3.1 How to use Smart Box
a)
Ensure that the voltage of all external systems is turned off
b)
Install necessary external cables. (Such as: the display cable connected to the HDMI
display, the power input cable to power the system, the USB cable connecting the
keyboard and mouse ...)
c)
Connect the power cord to a power source.
d)
RTSS-X502N adopts manual power-on design. Turn on the power and the system
starts to work.
3.3 Recovery MODE
Jetson TX1 / TX2 core modules can work in normal mode and Recovery mode. In Recovery mode,
you can perform file system update, kernel update, boot loader update, BCT update and other
operations.
To enter Recovery mode:
a) Turn off the system power supply.
b) Use a USB cable to connect the OTG-USB port of the RTSS-X502N and the USB
port of the Jetson development host.
c) Short-circuit the 3 and 4 pins of the GPIO connector to power the system. Keep the
power supply for more than 3 seconds, and then disconnect the 3 and 4 pins of the
GPIO connector.
d) The system enters Recovery mode, and you can perform subsequent operations at
this time.
