Realtimes Beijing Technology Co.,LTD
www.realtimes.cn/en/index.html
RTSS-X502N Reference Manual V1.0
10
4 Connectors Description
4.1 Serial connector
Function
Serial port
marking
COM1
～
2
Type
DB9
Pin define
Pin 1 location: The green frame on the right.
The COM1 ~ 2 serial ports are RS232 signals. The mapping
files in the Linux system are ttyS0 and ttyTHS2 in the / dev
directory.
TXD1 / RXD1 defaults to the kernel debug serial port, which
is used to output C-BOOT, U-BOOT, and Linux kernel
information. After the Linux kernel is started, it is used as
the serial port of the display terminal. TX1 / TX2 default
serial port settings are: 115200bps, 8N1.
Pin
Signal
Pin
Signal
1
NC
2
RXD1
3
TXD1
4
NC
5
GND
6
RXD2
7
TXD2
8
NC
9
GND
Function
Serial port
marking
COM3
～
4
Type
DB9
Pin define
Pin 1 location: The green frame on the right.
The COM3 ~ 4 serial ports are RS232 signals. The mapping
files in the Linux system are ttyTHS1 and ttyTHS3 in the /
dev directory.
Pin
Signal
Pin
Signal
1
NC
2
RXD3
3
TXD3
4
NC
5
GND
6
RXD4
7
TXD4
8
NC
9
GND
4.2 GPIO and function button connector
Function
GPIO and function button connectors
