Realtimes Beijing Technology Co.,LTD
Manual for RTSO-9001 V2.0
30
4.17 Recovery jumper wire
（
J12
）
Function
Force Recovery
jumper wire
The
board
level
RTSO-9001T
（
The upper plate
）
Marking
J5
Type
2.0mm ,2x5Pin Double row pins
Description
Connect the 1 and 2 pins of Recovery after power on, and
enter the Recovery mode 2 seconds later
Pin define
Pin-1
：
The green box on the right.
Pin
Signal
Pin
Signal
1
FRC
2
GND
3
ID
4
5 MIPI
Schematic design of camera interface section
For customers developing MIPI interface cameras that can be adapted to rtSO-9001 boards, please refer
to part of the schematic design of the MIPI interface section of RTSO-9001 below for hardware adaptation
design.
