RTI RKM-1, Инструкция по установке и эксплуатации

Страница: 9 / 24

9
It’s Under Control
®
thank you for using the RKM-1 Multi-Room Audio Keypad.
Perfect for multi-room audio control, the RKM- is designed to have a
clean, elegant style. Sized for a single gang electrical box, the RKM-
incorporates eight fully-programmable hard buttons and a customizable
display film which provides feedback of power status, selected source, and
volume level.
The RKM- can directly control almost any audio/video component up to
000 feet away using its infrared output port. When used with the available
RTI automation devices, the RKM- is capable of infrared routing, relay
control, power sensing and RS-22 communications for advanced control.
Using the available software drivers from RTI, the RKM- can communicate
bidirectionally with many popular multi-zone receivers (when used together
with two-way enabled RTI control processors).
Because RTI’s remote control products are sold only through professional
installers/programmers, and never directly to consumers, it is our
philosophy to not incorporate programming capability directly into our
products. Instead, we are committed to providing our dealers with
the hardware and software tools that allow them to create reusable
programming databases and templates in the most efficient and reliable
way possible.
IMPORtAnt nOtes
Please read these important notes about the RKM-:
The RKM- should be placed in an area where it is around normal
room temperature (between 60°F to 90°F).
Avoid installing the RKM- in a location where it can come in contact
with direct sunlight.
Do not install the RKM- directly adjacent to thermostats. Heat
generated by the RKM- may affect temperature measurement.
Do not use sharp objects on the buttons. It is designed to operate with
a touch of your finger.
Do not let the RKM- get wet. It should not be handled with wet hands
or placed in an area where it could get wet.
Do not subject the RKM- to smoke, dust, or vibrations. The display
may be damaged from excessive shock or vibration.
Only use the power supply that is specified for the RKM-1. Using the
wrong type of power supply may result in damage.
Do not disassemble the unit. Service of the RKM- should be
performed by authorized personnel only.
CHAPteR 1 | WelCOMe