rtd DM35820HR Скачать руководство пользователя страница 9

Страница: 9 / 82

RTD Embedded Technologies, Inc.

www.rtd.com

DMx820 User’s Manual

Ordering Information

The DMx820HR is available with the following options:

Table 1: Ordering Options

Part Number

Description

DM35820HR

PCIe/104 High-Speed Digital I/O DAQ Module

DM9820HR

PCI/104-Express High-Speed Digital I/O DAQ Module

DM8820HR

PCI-104 High-Speed Digital I/O DAQ Module

DM7820HR

PC/104-Plus High-Speed Digital I/O DAQ Module

IDAN-DM35820HR-62D

PCIe/104 High-Speed Digital I/O DAQ Module in IDAN enclosure
(with 62-

pin “D” connectors)

IDAN-DM35820HR-68D

PCIe/104 High-Speed Digital I/O DAQ Module in IDAN enclosure
(with 68-

pin “D” connectors)

IDAN-DM9820HR-62D

PCI/104-Express High-Speed Digital I/O DAQ Module in IDAN enclosure

IDAN-DM8820HR-68S

PCI-104 High-Speed Digital I/O DAQ Module in IDAN enclosure

IDAN-DM7820HR-68S

PC/104-Plus High-Speed Digital I/O DAQ Module in IDAN enclosure

The Intelligent Data Acquisition Node (IDAN™) building

block can be used in just about any combination with other IDAN building blocks to

create a simple but rugged 104™ stack. This module can also be incorporated in a custom

built RTD HiDAN™ or HiDANplus High Reliability

Intelligent Data Acquisition Node. Contact RTD sales for more information on our high reliability systems.

Contact Information

1.4.1

ALES

UPPORT

For sales inquiries, you can contact RTD Embedded Technologies sales via the following methods:

Phone:

1-814-234-8087 Monday through Friday, 8:00am to 5:00pm (EST).

E-Mail:

[email protected]

1.4.2

ECHNICAL

UPPORT

If you are having problems with you system, please try the steps in the Troubleshooting section of this manual on page79.

For help with this product, or any other product made by RTD, you can contact RTD Embedded Technologies technical support via the
following methods:

Phone:

1-814-234-8087 Monday through Friday, 8:00am to 5:00pm (EST).

E-Mail:

[email protected]

Содержание DM35820HR



















































































Результаты поиска

Содержание DM35820HR

Отзывы:

Бренды по названию

Популярные бренды

rtd DM35820HR, Руководство пользователя

Результаты поиска

Содержание DM35820HR

Отзывы:

Бренды по названию

Популярные бренды