rtd cpuModules CME34BT Скачать руководство пользователя страница 65

Страница: 65 / 110

BDM-610000088 Rev A

Chapter 4: Using the cpuModule 57

Operating System Specific Usage

Windows®

The CME34BT is fully supported under Windows 10 and Windows 7. Both 32 bit and 64 bit editions are

supported. Drivers for onboard peripherals such as video and Ethernet are provided on the companion DVD

that is shipped with the board. Updated drivers may be available for download from the RTD website.

(www.rtd.com)

Linux®

The

CME34BT

is fully supported with Linux kernel version 3.11 and onward. Earlier versions of the kernel

may not contain drivers for all chipset features (most notably SATA), and may not work as expected.
At the time of publication, RTD has validated openSUSE 13.1, openSUSE 13.2, and Ubuntu 15.10 (all

64-bit) on this platform. However, any standard PC Linux distribution with a 3.11 or newer kernel is

expected to work.

UEFI OS Installations

When dealing with UEFI OS installations, the BIOS setting for “EFI/Legacy Device Order” will need to be

changed to "EFI devices first”. The default boot order is to boot to “Legacy devices first”, which will render

the OS unbootable after an installation.

Содержание cpuModules CME34BT















































































































Результаты поиска

Содержание cpuModules CME34BT

Отзывы:

rtd cpuModules CME34BT, Руководство пользователя, Страница: 65 / 110

Результаты поиска

Содержание cpuModules CME34BT

Отзывы: