rtd CMX58886CX Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 110

rtd CMX58886CX Скачать руководство пользователя страница 2

ii

CMX58886CX cpuModule

BDM-610000050

Rev A

CMX58886CX cpuModules™ User’s Manual

RTD Document Number: BDM-610000050

Revision A

Copyright © 2006 RTD Embedded Technologies, Inc. All rights reserved.

Trademarks

Advanced Digital I/O, aDIO, a2DIO, Autonomous SmartCal, cpuModule, dspFramework, dspModule, IDAN, HiDAN,
HiDANplus, “MIL Value for COTS prices”, multiPort, and PC/104EZ are trademarks, and “Accessing the Analog World”,
dataModule, RTD, and the RTD logo are registered trademarks of RTD Embedded Technologies, Inc. PS/2, PC/XT,
PC/AT, and IBM are trademarks of International Business Machines Inc. MS-DOS, Windows, Windows 95, Windows 98,
and Windows NT are trademarks of Microsoft Corporation. Linux is a registered trademark of Linus Torvalds.
ROM-DOS is a trademark of Datalight, Inc. Intel is a registered trademark of Intel Corporation. M-Systems and
DiskOnChip are trademarks or registered trademarks of M-Systems Flash Disk Pioneers, Ltd. PC/104 is a registered
trademark of PC/104 Consortium. All other trademarks appearing in this document are the property of their respective
owners.

Contents and specifications within this manual are subject to change without notice.

Revision History

Revision

Date

Reason for Change

A

06/30/06

Initial release

«
1
2
3
4
...
»

Содержание CMX58886CX















































































































Отзывы:

Нет отзывов