rtd ATX104HR-EXPRESS, Руководство пользователя

Страница: 11 / 43

ATX104HR-EXPRESS
User’s Manual
ATX104HR-EXPRESS 11 RTD Embedded Technologies, Inc.
Chapter 2
B
OARD INSTALLATION
The ATX104HR-EXPRESS power supply module is very easy to connect to your
industrial or automotive control system. Direct interface to PC/104-EXPRESS systems
as well as EBX size boards is achieved. This chapter tells you step-by-step how to
install your ATX104HR-EXPRESS into your system.
Board installation
Keep your board in its antistatic bag until you are ready to install it to your system!
When removing it from the bag, hold the board at the edges and do not touch the
components or connectors. Please handle the board in an antistatic environment
and use a
grounded workbench for testing and handling of your hardware. Before
installing the board in your computer, check the power cabling. Failure to do so
may cause the power supply unit to malfunction or even cause permanent
damage.
General installation guidelines:

Touch the grounded metal housing of your computer to discharge any antistatic
buildup and then remove the board from its antistatic bag.

Hold the board by the edges and install it in an enclosure or place it on the table
on an antistatic surface.

Install your board in your system, and wire the power supply correctly.

Failure to do so may cause the power supply unit to malfunction or even cause
permanent damage to the device.

Check all wiring connections once and then once more again.

Check the input power to the board is in the range of 8 to 36V DC

Apply power to your ATX104HR-EXPRESS
, and make sure the diagnostic LED’s
indicate correct operation.