Real Time Automation, Inc.
50
1-800-249-1612
Diagnostics
– Alarm Status
Alarm Status will only display under the Diagnostic menu tab if at least 1 Alarm is enabled.
1)
# Alarms Enabled: This is a count of enabled alarms.
2)
# Alarms Active: This is how many alarms are presently active (set).
3)
Last Active Alarm: This is the last alarm that the gateway detected.
4)
Clear # of Times Active
: This will reset all alarms ‘# of Times Active’ to 0.
5)
Alarm #: The reference number to the given alarm on the alarm setup page.
6)
Name: The name of the alarm.
7)
Status: The current status of the alarm, either OK or ALARM.
8)
# of Times Active: This count represents the number of times this alarm has become active. If an
alarm is triggered, this count will increment.
Alarms
– Active
While one or more alarms are active, every page will display ‘Alarms Active’ at the top of the page. This
will no longer be displayed if all active alarms have been cleared.
When an alarm is activated, the following will occur:
1)
A one-time notification will be sent out to the email associated with the alarm.
2)
For duplicate emails to occur, the alarm must be cleared and then become active again.
3)
# Alarms Active
and
# of Times Active
will be incremented.
4)
Status of the Individual Alarm will be set to
Alarm
.
