RTA 460ESDFM-NNA1 Скачать руководство пользователя

Страница: 62 / 74

Real Time Automation, Inc.

1-800-249-1612

Diagnostics

– EtherNet/IP Adapter

Select the

EtherNet/IP Adapter

in the dropdown menu on the Diagnostics Page to view a breakdown of

the diagnostics and common strings that are displayed on the page. Additional diagnostic information
can be found by clicking the

Help

button.

NOTE

: This page will auto-refresh every five seconds with the latest data.

Clear All Values

- This will only affect displayed values.

This will reset all displayed values back to zero and clear the Status Strings.

If viewing EtherNet/IP adapter, this will only clear the values for the EtherNet/IP adapter section of
the gateway.

Device Status

Connected and Running:

An EtherNet/IP scanner has a connection to the gateway and outputs are valid.

Connected and Idle:

An EtherNet/IP scanner has a connection to the gateway and only inputs are configured or
the configured outputs are not yet valid.

Not Connected:

Ethernet Cable not plugged in.

The EtherNet/IP scanner has not opened communication to the gateway.

Error: Timeout:

The EtherNet/IP adapter has lost a connection to an EtherNet/IP scanner.

Содержание 460ESDFM-NNA1











































































Результаты поиска

Содержание 460ESDFM-NNA1

Отзывы:

Похожие инструкции для 460ESDFM-NNA1

Бренды по названию

Популярные бренды

RTA 460ESDFM-NNA1, Руководство пользователя

Результаты поиска

Содержание 460ESDFM-NNA1

Отзывы:

Похожие инструкции для 460ESDFM-NNA1

Бренды по названию

Популярные бренды