RTA 460ESBS-N700 Скачать руководство пользователя

Страница: 70 / 76

Real Time Automation, Inc.

1-800-249-1612

Diagnostics

– BACnet/IP Server

Select the

BACnet/IP Server

in the drop-down menu on the Diagnostics Page. Additional diagnostic

information can be found by clicking the

Help

button.

NOTE

: This page will auto-refresh every five seconds with the latest data.

Clear All Values

- This will only affect displayed values.

This will reset all displayed values back to zero and clear the Status Strings.

If viewing BACnet/IP Server, this will only clear the values for the BACnet/IP Server section of the
gateway.

Device Status:

Connected

–

The gateway is connected to a BACnet/IP client.

Not Connected

–

The gateway is not connected to a BACnet/IP client.

Error: Timeout

–

The gateway has not received a read/write request in the amount of time specified

by the Inactivity Timeout.

LED Status:

Good Communication (Solid Green)

–

Connected to a BACnet/IP client.

Never Connected (Blink Green)

–

Gateway has never been connected to a BACnet/IP client.

Connection Timeout (Blink Red)

–

The gateway has not received a read/write request in the amount

of time specified by the inactivity timeout.

Содержание 460ESBS-N700













































































Результаты поиска

Содержание 460ESBS-N700

Отзывы:

Похожие инструкции для 460ESBS-N700

Бренды по названию

Популярные бренды

RTA 460ESBS-N700, Руководство пользователя

Результаты поиска

Содержание 460ESBS-N700

Отзывы:

Похожие инструкции для 460ESBS-N700

Бренды по названию

Популярные бренды