DT2350 2-Channel Strain Gauge
Load Cell Data Logger Manual
ELM0099A
RST Instruments Ltd.
Page 15
T
ABLE
4-2
S
ENSORS TAB OPTIONS AND DESCRIPTION
Setting
Application
Enable Engineering
Units
Click the checkbox to apply Engineering Units.
Linear Conversion
Method
Enter the Calibration Factor and Zero Reading from the supplied calibration sheet.
Range Input
An alternate way to calculate coefficient parameters given range values.
Units Conversion
Units Type: Select unit type from drop-down menu.
Input Units: Select the calibration unit corresponding to the calibration sheet.
Output Units: Select desired output units from drop-down list.
Output Offset: User-defined offset value of pressure transducer elevation.
Display Format
Click to customize monitor display settings.
Upload to Logger
Click to update logger with current sensor settings.
Note
: 'Upload to Logger'
must
be clicked to update logger with new settings.
CAUTION:
DATA
LOSS
WARNING
T
HE PROGRAM WILL PROMPT THE USER TO RESTART LOGGING OR ERASE DATA
CURRENTLY CONTAINED IN THE LOGGER
.
C
URRENT READINGS AND ALL PREVIOUS
DATA
WITH
CURRENT
SENSOR
CALIBRATION
SETTINGS
WILL BE
DOWNLOADED TO A
*.
CSV FILE NEXT TIME DATA IS COLLECTED IF THE LOGGER
MEMORY IS
NOT
ERASED
.
Load from File
Click to load previously saved sensor settings.
Save to File
Click to save current sensor settings to file for later retrieval.
4.6
C
ONNECTIONS
T
AB
The connections tab can be used to access logger settings and advanced features.
Advanced features should be used only with the assistance of RST Instruments
technical personnel. Contact RST for more information.
