MEMS Digital in-Place Inclinometer System
Quick Start Up Guide
ICM0095B
RST Instruments Ltd.
2
F
IGURE
2-2
C
ABLE TIE
–
DO NOT REMOVE
2. Record the serial number of each sensor and its order in the string, from the top
to the bottom of the string.
Connect the IPI string to the desired data logger, following the wiring scheme outlined in
Table 2-1.
CAUTION:
I
T IS CRITICAL THAT THE SENSORS ARE INSTALLED IN THE SAME ORDER ON
THE STRING AS IN THE INITIAL SET UP AND CONFIGURATION
.
R
EAD ERRORS
AND STRING FAILURE MAY OCCUR
.
