RSS M-400 Скачать руководство пользователя страница 82

Страница: 82 / 253

AUX channel and MAIN L/R channel operations

Access the AUX/MAIN COPY popup for the desired copy-
source channel.

fig.ScrChCopyOut.eps

Verify that the copy-source channel is correct.

Move the cursor to the desired copy parameter select
button, and press [ENTER] to select it.

Move the cursor to the desired copy-destination channel
select button, and press [ENTER] to select it. You can
select more than one channel.

Press [F3 (PASTE)].

A confirmation message will ask you to confirm the Copy
operation.

Press [F8 (PASTE)] to execute the Copy operation.
If you press [F7 (CANCEL)], the operation will be cancelled.

Press [F8 (CLOSE)] to close the popup.

When you execute PASTE, the copy-destination channel select
buttons will be cleared.

You can recall channel settings from the library, or store the settings
of the current channel in the library.

AUX/MAIN library operations are performed in the AUX/MAIN
LIBRARY popup.

fig.ScrChLibOutGuide.eps

Target channel

This indicates the channel that is the target of the AUX/MAIN
LIBRARY popup.

Library data list

This is a list of the library data.

Recall parameter select buttons

Use these to select the parameters that will be recalled. You can
select the following parameters.

Noise may occur when you preview or recall a library item, but
this is not a malfunction.

AUX sends will not be recalled for AUX channels. The MAIN
send will not be recalled for the MAIN L/R channel.

Copying the channel settings

Using the AUX/MAIN library

AUX/MAIN LIBRARY popup

ATT

Attenuator

Four-band EQ

Sends

AUX send and MAIN send

Fader

Fader and mute

Balance

Limiter

M-400_v15_e.book 82 ページ２００８年６月２０日　金曜日　午後４時５分

Содержание M-400






























































































































































































































































Результаты поиска

Содержание M-400

Отзывы:

Похожие инструкции для M-400

Бренды по названию

Популярные бренды

RSS M-400, Руководство пользователя

Результаты поиска

Содержание M-400

Отзывы:

Похожие инструкции для M-400

Бренды по названию

Популярные бренды