manualshive.com logo in svg

RSS M-400, Руководство пользователя

Owner'S Manual к RSS M-400 доступен для скачивания бесплатно с нашего сайта. Этот manual предоставляет подробные инструкции по использованию и уходу за вашим устройством. Загрузите его сейчас с manualshive.com и узнайте все о возможностях этого продукта.

Поделиться
Скачать
background image

 

6

 

IMPORTANT NOTES

 

291b

 

In addition to the items listed under “IMPORTANT 

SAFETY INSTRUCTIONS” and “USING THE UNIT 

SAFELY” on pages P. 2 and P. 3, please read and 

observe the following:

 

Power Supply

 

301

 

• Do not connect this unit to same electrical outlet that is 

being used by an electrical appliance that is controlled by 
an inverter (such as a refrigerator, washing machine, 
microwave oven, or air conditioner), or that contains a 
motor. Depending on the way in which the electrical 
appliance is used, power supply noise may cause this unit 
to malfunction or may produce audible noise. If it is not 
practical to use a separate electrical outlet, connect a 
power supply noise filter between this unit and the 
electrical outlet.

 

307

 

• Before connecting this unit to other devices, turn off the 

power to all units. This will help prevent malfunctions 
and/or damage to speakers or other devices.

 

308

 

• Although the LCD and LEDs are switched off when the 

POWER switch is switched off, this does not mean that the 
unit has been completely disconnected from the source of 
power. If you need to turn off the power completely, first 
turn off the POWER switch, then unplug the power cord 
from the power outlet. For this reason, the outlet into 
which you choose to connect the power cord’s plug 
should be one that is within easy reach and readily acces-
sible.

 

308

 

• When you turn off the power switch, the M-400’s display, 

buttons, and meters will go dark, but this does not mean 
that the main power has been completely shut off.

 

Placement

 

351

 

• Using the unit near power amplifiers (or other equipment 

containing large power transformers) may induce hum. 
To alleviate the problem, change the orientation of this 
unit; or move it farther away from the source of inter-
ference.

 

352a

 

• This device may interfere with radio and television 

reception. Do not use this device in the vicinity of such 
receivers.

 

352b

 

• Noise may be produced if wireless communications 

devices, such as cell phones, are operated in the vicinity of 
this unit. Such noise could occur when receiving or initi-
ating a call, or while conversing. Should you experience 
such problems, you should relocate such wireless devices 
so they are at a greater distance from this unit, or switch 
them off.

 

354a

 

• Do not expose the unit to direct sunlight, place it near 

devices that radiate heat, leave it inside an enclosed 
vehicle, or otherwise subject it to temperature extremes. 
Excessive heat can deform or discolor the unit.

 

355b

 

• When moved from one location to another where the 

temperature and/or humidity is very different, water 
droplets (condensation) may form inside the unit. Damage 
or malfunction may result if you attempt to use the unit in 
this condition. Therefore, before using the unit, you must 
allow it to stand for several hours, until the condensation 
has completely evaporated.

 

360

 

• Depending on the material and temperature of the surface 

on which you place the unit, its rubber feet may discolor 
or mar the surface.
You can place a piece of felt or cloth under the rubber feet 
to prevent this from happening. If you do so, please make 
sure that the unit will not slip or move accidentally.

 

Maintenance

 

401a

 

• For everyday cleaning wipe the unit with a soft, dry cloth 

or one that has been slightly dampened with water. To 
remove stubborn dirt, use a cloth impregnated with a 
mild, non-abrasive detergent. Afterwards, be sure to wipe 
the unit thoroughly with a soft, dry cloth.

 

402

 

• Never use benzine, thinners, alcohol or solvents of any 

kind, to avoid the possibility of discoloration and/or 
deformation.

 

Repairs and Data

 

452

 

• Please be aware that all data contained in the unit’s 

memory may be lost when the unit is sent for repairs. 
Important data should always be backed up on a USB 
memory, or written down on paper (when possible). 
During repairs, due care is taken to avoid the loss of data. 
However, in certain cases (such as when circuitry related 
to memory itself is out of order), we regret that it may not 
be possible to restore the data, and Roland assumes no 
liability concerning such loss of data.

M-400_v15_e.book 6 ページ ２００８年６月２０日　金曜日　午後４時５分

Содержание M-400






























































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для M-400

Paramount Fitness BM30 Installation & Operation Manual preview
BM30
Бренд: Paramount Fitness Страницы: 17
Sammic SM User Manual preview
SM
Бренд: Sammic Страницы: 16
Zapi SMART CONSOLE Manual preview
SMART CONSOLE
Бренд: Zapi Страницы: 11
Zoom MULTISTOMP MS-100BT Operation Manual preview
MULTISTOMP MS-100BT
Бренд: Zoom Страницы: 40
Lite-Puter LPTJUNIOR Instructions Manual preview
LPTJUNIOR
Бренд: Lite-Puter Страницы: 33
Grohe Europlus E 36 021 Manual preview
Europlus E 36 021
Бренд: Grohe Страницы: 82
Jomlabs Dsh4 User Manual preview
Dsh4
Бренд: Jomlabs Страницы: 25
audiophony LIVEtouch20 User Manual preview
LIVEtouch20
Бренд: audiophony Страницы: 40
Behringer PRO MIXER DJX750 (Dutch) Betjeningsvejledning preview
PRO MIXER DJX750
Бренд: Behringer Страницы: 10
Currys ESSENTIALS C15HMW10 Instruction Manual preview
ESSENTIALS C15HMW10
Бренд: Currys Страницы: 2
Electrolux Dito XBEF10AS Brochure & Specs preview
Dito XBEF10AS
Бренд: Electrolux Страницы: 4
Electrolux Dito MBE40S1 Brochure & Specs preview
Dito MBE40S1
Бренд: Electrolux Страницы: 4
Electrolux Dito XBE80AS Brochure & Specs preview
Dito XBE80AS
Бренд: Electrolux Страницы: 4
Electrolux Dito XBB20S Brochure & Specs preview
Dito XBB20S
Бренд: Electrolux Страницы: 4
Electrolux Dito PSF50 Brochure & Specs preview
Dito PSF50
Бренд: Electrolux Страницы: 3
Philips Harmony DCB8000 Specifications preview
Harmony DCB8000
Бренд: Philips Страницы: 3
Philips MC108C User Manual preview
MC108C
Бренд: Philips Страницы: 18
Philips MC1000 User Manual preview
MC1000
Бренд: Philips Страницы: 17

Бренды по названию

Популярные бренды

Загрузить еще бренды