RSS M-400 Скачать руководство пользователя страница 180

Страница: 180 / 253

180

User settings

Editing the user button assignments

Access the USER PREFERENCE popup.

fig.ScrUserFader.eps

Press [F2 (BUTTON 1–8)] (or [F2 (BUTTON 9–16)]) to access
the BUTTON 1–8 tab (or the BUTTON 9–16 tab.)

fig.ScrUserBtn.eps

Move the cursor to the desired user button assignment, and
press [F5 (EDIT)].

fig.ScrUserBtnAsgn.eps

The USER BUTTON ASSIGN popup will appear.

Applicable user button

This indicates the user button to which the USER BUTTON
ASSIGN popup applies.

FUNCTION list

You can select a function from this list.

PARAMETER 1 and 2 lists

Here you can select the parameters of the function you’ve
selected in the FUNCTION list.

In the USER BUTTON ASSIGN popup, the function buttons
perform the following operations.

In the FUNCTION list, select the desired function.

Next, use the PARAMETER 1 list and PARAMETER 2 list to
select the parameters.

For a list of the functions that can be assigned, refer to “User
button functions” (p. 209).

Press [F8 (CLOSE)] to finalize the changes and close the
USER BUTTON ASSIGN popup.

If you press [F7 (CANCEL)], the changes will be cancelled and
the USER BUTTON ASSIGN popup will close.

Press [F8 (OK)] to finalize the USER PREFERENCE changes
and close the popup.

If you press [F7 (CANCEL)], the changes will be cancelled and
the USER PREFERENCE popup will close.

Editing other user preferences

Access the USER PREFERENCE popup.

fig.ScrUserFader.eps

Press [F3 (OTHER)] to access the OTHER tab.

fig.ScrUserPref.eps

Move the cursor to the desired item, and press [ENTER] to
change it.

Press [F8 (OK)] to finalize the USER PREFERENCE changes
and close the popup.

If you press [F7 (CANCEL)], the changes will be cancelled and
the USER PREFERENCE popup will close.

[F8 (CLOSE)]

Confirms the changes and closes the popup.

M-400_v15_e.book 180 ページ２００８年６月２０日　金曜日　午後４時５分

Содержание M-400






























































































































































































































































Результаты поиска

Содержание M-400

Отзывы:

Похожие инструкции для M-400

Бренды по названию

Популярные бренды

RSS M-400, Руководство пользователя

Результаты поиска

Содержание M-400

Отзывы:

Похожие инструкции для M-400

Бренды по названию

Популярные бренды