manualshive.com logo in svg

RSS M-380, Руководство пользователя, Страница: 130 / 246

Поделиться
Скачать
RSS M-380 Скачать руководство пользователя страница 130

 

130

Scene memory

 

Scene memory

 

1.

 

Access the SCENE LIST EDIT popup.

 

2.

 

From the scene list, select the copy-source scene, and 
press [F2 (COPY)].

 

fig.ScrSceneListMove.eps

 

A message will ask you to confirm the Copy operation.

Press[F8 (COPY)] to save the selected scene in the clipboard.

If you press [F7 (CANCEL)], the operation will be cancelled.

 

3.

 

Select the desired copy-destination scene from the scene 
list.

 

4.

 

Press [F4 (PASTE)] or [F5 (INSERT)] to copy the scene.

 

If you press [F4 (PASTE)], a message will ask you to confirm the 
Paste operation.

Press [F8 (PASTE)] to carry out the Paste operation. The scene 
you selected in step 2 will be overwritten onto the number you 
selected in step 3.

If you press [F7 (CANCEL)], the operation will be cancelled.

If you press [F5 (INSERT)], a message will ask you to confirm 
the Insert operation.

Press [F8 (INSERT)] to carry out the Insert operation. The scene 
you selected in step 3 and all subsequent scene will be 
renumbered upward by one, and the scene you copied in step 2 
will be copied to the number you selected in step 3.

If you press [F7 (CANCEL)], the operation will be canceled.

 

If a scene exists at scene number 299, you won’t be able to use 
[F5 (INSERT)] to insert a scene.

 

You can’t paste to a scene that’s locked.

 

1.

 

Access the SCENE LIST EDIT popup.

 

fig.ScrSceneListMove.eps

 

2.

 

From the scene list, select the scene that you want to cut, 
and press [F3 (CUT)].

 

A message will ask you to confirm Cut operation.

Press [F8 (CUT)] to carry out the Cut operation. The selected 
scene will be cut, and the numbers that follow the selected scene 
number will be renumbered downward by one.

If you press [F7 (CANCEL)], the operation will be cancelled.

 

Following step 2, you can use [F4 (PASTE)] or [F5 (INSERT)] to 
paste or insert the cut scene to any desired scene number.

 

1.

 

Access the SCENE LIST EDIT popup.

 

2.

 

From the scene list, select the scene whose contents you 
want to erase.

 

3.

 

Press [F6 (CLEAR)].

 

A message will ask you to confirm the Clear operation.

Press [F8 (CLEAR)] to carry out the Clear operation. The 
contents of the scene you selected in step 2 will be erased.

If you press [F7 (CANCEL)], the operation will be cancelled. 

 

You can’t erase a scene that is locked.

 

Copying a scene to another 

number

 

Cutting a scene

Erasing the contents of a scene

M-380_e1.book 130 ページ ２０１０年６月３０日　水曜日　午前１０時３１分

Содержание M-380























































































































































































































































Отзывы:

Нет отзывов