2
Digital Soldering Station, Model № DS80
3
Digital Soldering Station, Model № DS80
Kit Contents
Item
Ordering Stock No
DS80 - Station
665-4789
Compromising
DS80-Pu - Power Unit
DS80-R - Rest
DS80-S - Soldering Iron
DS80-T1-0.8mm tip
UK converter plug
Instructions for use (GB,FR,DE,IT,ES)
Available separately:
DS80-S - Replacement iron
665-4805
DS80-T1 - 0.8mm Round Tip
665-4808
DS80-T2 - 1.6mm Chisel Tip
665-4802
DS80-T3 - 3.2mm Chisel Tip
665-4811
DS80-T4 - 0.4mm Round Tip
665-4814
DS80-T5 - 1.6 mm Ø x 45° Tip
665-4818
All Tips supplied in packs of 3.
Technical Data
Soldering temperature:
..............................................................................................................
150 °C to 450 °C
Resolution:
......................................................................................................................................................
1 °C
Soldering iron: ........................................................................................................................................
24V / 80W
Power supply:
...............................................................................................................
230V a.c. 50/60 Hz 90 VA
Dimensions, soldering station:
...........................................................................
110 x 120 x 135 mm (W x H x D)
Dimensions, soldering iron:
................................................................................................................
200 x 30 mm
Fuse Type:
...............................................................................................
Anti surge, 1A HBC ceramic 5 x 20 mm
Manufactured in accordance with:
........................................................
EN 60335-1:2006, EN 60335-2-45: 2006
UK
The DS80 Soldering Station is supplied with a
moulded 2 pin Euro plug as standard. There is a
Converter plug for UK mains sockets supplied loose.
This must be fitted before use, and only by persons
deemed competent to do so.
Do not use an adaptor plug and socket.
Proper Use
This soldering station is intended exclusively for the
●
purposes of soldering and desoldering electrical
and electronic components on printed circuit boards
and modules, for solder-coating conductive patterns
and cable ends and for manufacturing cable
connectors.
It is not intended for heating liquids or plastics.
●
It is not for use in the open air. Avoid contact with
●
dampness or humidity under all circumstances.
Caution!
Please read these instructions carefully prior to initial
operation. Failure to observe the safety instructions
results in risk to people or property.
The manufacturer shall not be liable for damage
resulting from misuse of the machine or
unauthorised alterations.
Safety Instructions
Caution! Risk of injury through burning.
Even after switching off, or removal, the soldering
tip / hot bar still requires a time to cool down. After
soldering, the soldered part and workpiece carrier
are still hot.
Take account of environmental influences.
Do not use the soldering tool in a damp or
wet environment.
Do not use or place the soldering station in the
proximity of any easily flammable, ignitable or
combustible substances or gases.
Protect yourself against electric shocks.
Avoid touching earthed objects such as pipes,
heaters, cookers and refrigerators. Use a residual
current device (RCD) for additional protection.
Children and other unauthorised persons
must stay clear of the work area.
Never allow other persons to touch the soldering
tool or cable. Keep other persons away from your
workplace. The soldering tool must be used by
qualified staff only and those specifically assigned
this task.
Store your soldering tool in a safe place.
When not in use, soldering tools should be stored
in a dry, / secure area.
The personal protective equipment must
comply with the safety specifications
relevant to the workplace.
Protect yourself against solder splashes, wear
suitable protective clothing to protect yourself against
injury through burning and protect your eyes by
wearing eye protectors.
Use a soldering fume extraction unit.
If appliances for soldering fume extraction devices
are available, ensure that they are connected and
used in accordance with the instructions.
Do not use the cable for purposes other
than those for which it is intended.
Never carry the soldering tool by the cable.
Do not use the cable to pull the plug out of the
socket. Protect the cable against heat, oil and
sharp edges.
DS80 incorporates intelligent power control to
maintain pre-set temperature during soldering and
prevents the iron from overheating when idling on
standby.
Tip 1
Tip 2
Tip 3
Tip 4
Tip 5
