RS Automation CSD5, Руководство по установке, Страница: 18 / 40

18
CSD5 Digital Servo Drives
Drive Specifications
Drive
CSD5
_
A5Bx1 01Bx1 02Bx1 04Bx1 08Bx1 10Bx1 15Bx1
Weight 0.9 kg (1.98 lbs) 1.2 kg
(2.65 lbs) 2.1 kg (4.63 lbs)
Temperature 0° C to 50° C (32° F to 122° F)
Operating Shock,
and Vibration - Shock
15g, 11ms half-sine pulse
(3 positive and 3 negative pulses in each of 3 mutually perpendicular directions)
- Vibration
5-55Hz @ 0.35 mm (0.014") double amplitude, continuous displacement,
55-500Hz @ 2g peak constant acceleration
(10 sweeps in each of 3 mutually perpendicular directions)
Short Circuit Current Rating
with No Fuse Restrictions Suitable for use on a circuit capable of delivering not more than 5000 rms symmetrical
amperes, 240 Volts maximum.
Short Circuit Current Rating
with Fuse Restrictions Suitable for use on a circuit capable of delivering not more than 100,000 rms symmetrical
amperes, 240 Volts maximum, when protected by high interrupt capacity, current limiting
fuses UL248 (Class CC, G, J, L, R, T).
Motor Overload Protection Utilizes solid state motor overload protection which operates:

within 8 minutes at 200% overload.

within 20 seconds at 600% overload
Motor over-temperature sensing is not provided by the drive.
Symbols Used on Drive Protective ground conductor terminal
Certification and Compliance UL
®
listed to U.S. and Canadian safety standards (UL 508C File E226834)
CE marked for all applicable directives
Integral solid state short circuit protection does not provide branch circuit protection. Branch circuit protection must be provided in accordance with the National
Electrical Code and any additional local codes.
Main Input Power
Nominal Input Voltage (V
rms
)
1,2
200-240V, 1 phase, 50 or 60 Hz 200- 240V,
1or3 phase,
50 or 60 Hz 200- 240V,
3 phase,
50 or 60 Hz
Input Current (A
rms
) 1.3A 2.38A 3.68A 7.14A 6.25A
(3 phase)
10.82A
(1 phase)
8.75A 12.37A
Maximum Inrush Current
(0-peak) 22.6A
Maximum Power
Cycles/Minute 2 power cycle/1 minute interval
DC Bus Discharge Time 5 minutes after removal of main AC power
Control Input Power
Input Voltage (V
rms
)
1,2
200-240V, 1 phase, 50/60 Hz
Input Current (A
rms
) 0.1A