RR Mechatronics STARRSED TL, Инструкция по эксплуатации

Страница: 53 / 137

This screen is divided in 6 maintenance level sections. For maintenance levels 1 to 4, the status is monitored
and flagged if it is overdue.
Press the button
Info to open the work instruction for a specific maintenance level.
When this maintenance is done press the button Done to log the completed work in the maintenance log
file.
5.5.6 - Close
Make the selection End-of-day wash procedure or Close program:
End-of-day wash procedure will start to wash all pipettes, needle, fill-nozzle and rinse-nozzle (wash station).
The function can be set up for automatic execution in the following screen.
Close program will only close down the program.
5.5.7 - End-of-day-wash options
End-of-day wash procedure:
All pipettes will be washed once, needle, fill-nozzle and rinse-nozzle (wash station) are primed
The following settings can be selected for the function:
▪ No End-of-day wash: The function is not active.
▪ Immediately: The function runs immediately after pressing the button OK.
▪ Only once: The function runs only once at the selected time.
Starrsed TL program
MRN-164_2-EN Version 1.08 Starrsed TL
53