RPS Blizzard 150, Руководство пользователя

Страница: 12 / 84

5
· Always follow proper procedures for climbing hills as described in this manual.
Check the terrain carefully before you start up any hill. Never climb hills with
excessively slipper or loose surfaces. Shift you weight forward. Never open the
throttle suddenly or make sudden gear changes. Never go over the top of any hill at
high speed.
· Always follow proper procedures for going down hills and for braking on hills as
described in this manual. Check the terrain carefully before you start down any hill.
Shift your weight backward. Never go down a hill at high speed. Avoid going down a
hill at an angle that would cause the vehicle to lean sharply to one side. Go straight
down the hill where possible.
· Always follow proper procedures for crossing the side of a hill as described in this
manual. Avoid hills with excessively slippery or loose surfaces. Shift your weight to the
uphill side of the ATV. Never attempt to turn the ATV around on any hill until you have
mastered the turning technique described in this manual on level ground. Avoid
crossing the side of a steep hill if possible.
· Always use proper procedures if you stall or roll backwards when climbing a hill. To
avoid stalling, use proper gear and maintain a steady speed when climbing a hill. If
you stall or roll backwards, follow the special procedure for braking described in this
manual. Dismount on the uphill side or to a side if pointed straight uphill. Turn the
ATV around and remount, following the procedure described in this manual.
· Always check for obstacles before operating in a new area. Never attempt to operate
over large obstacles, such as large rocks or fallen trees. Always follow proper
procedures when operating over obstacles as described in this manual.
· Always be careful when skidding or sliding. Learn to safely control skidding or sliding
by practicing at low speeds and on level, smooth terrain. On extremely slippery
surfaces, such as ice, go slowly and be very cautious in order to reduce the chance of
skidding or sliding out of control.
· Never operate an ATV in fast flowing water or in water deeper than that specified
in this manual. Remember that wet brakes may have reduced stopping ability.
Test your brakes after leaving water. If necessary, apply brakes several times to
let friction dry out the linings.
· Always use the size and type tires specified in this manual. Always maintain
proper tire pressure as described in this manual.
· Never modify an ATV through improper installation or use of accessories.