background image

4

PX4 AIR

®

RESPIRATION

The RPB

®

 PX4 AIR

®

 is approved by NIOSH in the categories as follows:

Powered Air

The RPB

®

 PX4 AIR

®

 PAPR, when properly fitted and used with all required components, 

including the Breathing Tube Assembly and the approved head top, is part of a NIOSH 
approved powered air purifying respirator. As such, it significantly reduces, but does not 
completely eliminate, the breathing of contaminates by the respirator wearer. See the 
instruction manual and approval label for the selected head top for NIOSH approval with the PX4 
AIR

®

and the assigned protection factor. Specific protection depends on the filter selected for 

use in the RPB

®

 PX4 AIR

®

 PAPR. It is approved to be used with the 03-985 High Efficiency 

(HE) Filter.

HAZARD LIMITATIONS

The RPB

®

 PX4 AIR

®

 PAPR is 

NOT FOR USE

 if:

 In atmospheres immediately dangerous to life or health (IDLH).

 Wearer cannot escape without the aid of the respirator.

 Atmosphere contains less than 19.5% oxygen.

 In abrasive blasting applications.

 For protection against hazardous gases (e.g., carbon monoxide).

 Contaminants are in excess of regulations or recommendations.

 Contaminants or contaminant concentrations are unknown.

PROTECTION PROVIDED AND LIMITATIONS

Improper selection, fit, use, or maintenance of this product can result in 
injury; life threatening delayed lung, skin or eye disease; or death. 

This product is intended for occupational use in accordance with applicable standards or 
regulations for your location, industry, and activity (see Employer Responsibilities, page 7). 
Familiarity with standards and regulations related to the use of this protective equipment is 
recommended, even if they do not directly apply to you. If self-employed or if used in a non-
occupational setting, refer to Employer Responsibilities and Product User Safety Instructions. Go 
to rpbsafety.com/importantsafetyinformation/ for helpful links to OSHA and other content.

Employers: 

Read this manual and the respirator head-top Instruction Manual and carry out the 

Employer Responsibilities (page  7).   

Product users:

  Read this manual and the respirator head-top Instruction Manual and follow the 

Product User Safety Instructions (page  9).

Check website for updates.

 Product manuals are regularly updated. 

Visit www.rpbsafety.com/resources/for the most recent version of this manual before using the 
product.

IMPORTANT SAFETY INFORMATION

WARNING

Содержание NIOSH PX4 AIR































Отзывы: