RoyalTek Navi@Mouse, Руководство пользователя

Страница: 10 / 38

RGM-1000
9
The default COM port is COM3 in this example.
Step 3:Place your Navi@Mouse on the outside roof of your vehicle with magnetic base.
Step 4:Power on your Notebook PC or Handheld PC.
Step 5:Choose the correct COM port for running the map or navigation software.
Step 6:Run the Navi@mouse test program. Please refer to “
How to test your Navi@mouse ”.
Notice:
(1) Make sure the power is off before started.
(2) For safety reason, please do not install RGM-1000 while driving.
(3) To receive NMEA0183 navigational data, please use the Hyper Terminal program of Windows
95/98

. Please setup the COM port connected with Navi@Mouse to:
Baud rate : 4800
Data bit : 8
Parity : None
Stop bit : 1
Flow control : None.