6 | Food Cutter
Care and Cleaning:
It is recommended you Do NoT wash any part of your Royal Cutter in
the dishwasher.
Before first use and after each subsequent use, thoroughly clean your Royal Cutter with a damp,
soapy cloth and rinse with warm water. To retain the mirror like finish, dry with a soft cloth. As with
any high quality cutlery, dishwasher use is not recommended as the harsh detergents can dull the
cutting cones and the overall finish of the unit.
Hopper:
To remove, place your thumb against the inside wall of the Hopper above the tabs and
push outward. The tabs will release from the slots and you can lift the Hopper and Food Guide
assembly away. Do not twist or pull Hopper upward. The Hopper can be washed with warm
soapy water and towel dried.
Cutting Cones:
Cones are easily cleaned by holding them under warm running water
immediately after use. Do not leave cutting cones in water or stack them together when wet.
Thoroughly towel-dry the cutting cones immediately after you wash them. As with other fine
cutlery, the keen cutting edge of the stainless steel cones may show signs of discoloration or
corrosion if not thoroughly towel-dried. If this should occur, simply remove the discoloration or
corrosion with a Scotch-Brite® or similar mild scouring pad.
CaUTIoN:
This is a precision cutting instrument and the edges of the cutting cones are very sharp.
USE EXTREME CARE WHEN HANDLING.
Base and Food Chute assembly:
Do not immerse the Base and Food Chute assembly in
water as it may eventually destroy the sealed bearing. Simply wipe with a damp cloth as directed
above. Do not wash the Base and Food Chute assembly in the dishwasher.
For additional product and warranty information,
visit Royal Prestige
®
on the web at www.royalprestige.com
6 |
www.royalprestige.com
