Operation (cont.)
TM21PATHTRSS1
If you are unable to ignite the heater using the normal method, please use the ignition bar with a match to reach the burner for
ignition through the hole on the bottom of burner diffuser. Insert the match from the back side of the burner assembly which is
opposite of the control panel.
WARNING:
If at any time you are unable to light the burner and
smell gas, wait 5 minutes to allow gas to dissipate before attempting
to light the heater.
WARNING:
DO NOT touch or move the heater for at least 45
minutes after use. Allow the emitter and dome to cool before
touching.
CAUTION:
Avoid inhaling fumes emitted from the heater’s first
use. Smoke and odor from the burning of oils used in manufacturing
will appear. Both smoke and odor will dissipate after approximately
30 minutes. The heater should NOT produce thick black smoke.
Cleaning & Maintenance
Abrasive cleaners will damage this product.
NOTE: A slight pop is normal when burner is extinguished.
Never use oven cleaner to clean any part of the heater.
Do not clean any heater part in a self-cleaning oven. The extreme heat will damage the finish.
More frequent cleaning may be required as necessary. It is imperative that control compartment, burners and circulating air
passageways of the heater be kept clean.
Spiders and insects can create a dangerous condition that may damage heater or make it unsafe. Keep the burner area clean of
all spiders, webs or insects. Clean burner holes by using a heavy-duty pipe cleaner. Compressed air may help clear away smaller
particles.
Inspect the heater before each use.
Have heater inspected annually and repairs should be made by a qualified service person.
Check heater immediately if any of the following conditions exist:
a. The smell of gas in conjunction with extreme yellow tipping of burner flames.
b. Heater does not reach proper temperature.
c. Heater’s glow is excessively uneven.
d. Burner makes popping noises during use.
Carbon deposits may create a fire hazard. Keep dome and emitter clean at all times.
Do not clean heater with combustible or corrosive cleaners. Use warm, soapy water.
This heater should be thoroughly cleaned on a regular basis.
After a period of storage and/or no use, check for leaks, burner obstructions and inspect for any abrasion, wear, and cuts to the
hose.
