Royal Enfield Z-Drive 130, Руководство по обслуживанию и список запасных частей

Страница: 18 / 29

18
PARTS LIST
METHOD OF IDENTIFYING AND
ORDERING SPARE PARTS
The Parts List contains the numbers and descriptions
of all parts comprising the Model 130, 130H, 130 Non
Swivel Transom Units, together with a Supplementary
Section giving those of the recommended propellers
and other principal accessories. (For further details of
Accessories, see separate leaflet).
IDENTIFICATION
Each part contained in the Unit is located in its section
in columns headed as follows:
Ref. No.
Relates the item concerned to its position on the
drawing.
S or N.S.
'S' indicates that the item
in
question is available as a
spare part.
'ICS.' indicates that the item is not available as a
spare part by itself.
(for various reasons, some sub-assemblies or component
parts can ONL Y be supplied in the complete assembly. It is
therefore necessary, before ordering, to determine whether
or not the part required is, in fact, available separately).
Qty. Req.
Indicates the total quantity of the particular item in the
assembly, or group, in which it is contained.
Part No. & Description Is self-explanatory.
Remarks Contains supplementary notes and
information.
As a guide for use of the Parts List, the following
examples are given:
1.Locate the item required and its Ref. No.
on the drawing.
Locate the Ref. No. in the list, so as to check
whether 'S' or 'ICS.' determine quantity, and
ascertain part number and description.
(a) If the part is indicated 'S', then it can be
ordered separately, e.g. Ref. No. 7 in the
Transom and Swivel
2
Plate Assembly on Page 18 is read as:
33432309 Sleeve, Swivel Plate
Locking Plunger
This is indicated 'S' and, therefore, is
available as a spare part.
(b) If the part is indicated 'ICS.' then it can
only be supplied inside its containing
assembly, e.g. Ref. No. 112 in the
Steering Linkage Section on Page 22 is
read as:
7067 Link, Steering Upper
This is indicated 'ICS.' and can ONLY be
supplied inside the assembly of which it is
part. This assembly is covered by the first
number in the next left hand column
reading upwards which is:
7225 Assembly Link and Bushes
and is the one that should be ordered.
ORDERING
When ordering parts, it is imperative to quote the serial
number of the Unit and to specify the part number,
description and quantity of the items required. If in
doubt, then the reference numbers should also be
given to facilitate identification by your Dealer.
The Unit serial number will be found stamped on the
port side of the Drive Housing; it consists of six digits,
commencing 2ZE. The power trim model has its own
suffix H. We would again stress the importance of
always quoting the number and giving complete
information if parts orders are to be promptly
expedited.
All enquiries relating to parts and accessories should
be addressed to:
BOB KNOWLES PLANT SERVICES LTD.
MARINE DIVISION
9 VULCAN ROAD
LEICESTER LE5 5EF
TEL: 0116 253 8685
FAX: 0116 251 4977