Royal Enfield Classic 350 2019, Руководство пользователя, Страница: 35 / 126

34
REAR WHEEL REMOVAL

Place the motorcycle on center
stand on a firm and flat surface.

Note the alignment index marks
in the both side of swing arm.

Remove wheel spindle from left
side as shown.

Remove the brake hose pipe from
the swing arm clips.

Remove the caliper assembly
with bracket by pulling out from
the swing arm slot.
 Place the wooden piece/card
board sheet in between the
brake pads.
 Remove the left side spacer from
rear wheel hub.
 Tilt motorcycle to right side and
slide out rear wheel.
REAR WHEEL REASSEMBLY

Ensure the four Cush rubbers are
in position inside the rear wheel
hub.

Tilt motorcycle to right side and
insert the wheel assembly
between the swing arms.
 Position the rear wheel with cush
rubber on the rear chain
sprocket.

Fix the left side spacer in rear
wheel hub.

Remove the wooden piece / card
board sheet in between the
brake pads.

Insert the caliper assembly with
bracket by matching the slots
given in the caliper and swing
arm.
Index mark
Swing Arm Reference
Mark
Caliper Slot
WHEEL REMOVAL / ASSEMBLY