x 2
drill
Narrow Log Store
Assembly Instructions
English SS442A
Information
No.
Components
Qty.
1 Floor
1
2 Left side panel
1
3 Right side panel
1
4 Back slat
10
5 Shelf
1
6 Roof panel
1
7 Roof top board
1
8 Roof fascia
1
No.
Fixing Kit
Qty.
9 63mm screws
4
10 50mm screws
4
11 32mm screws
4
12 40mm nails
46
13 30mm nails
6
Before assembly
•
We recommend that time is taken to
read the instructions before starting
assembly, then follow the easy step by
step guide. The instruction sheet is only
a guide to the assembly. Certain items may
not be shown to scale.
•
Check all components prior to assembly
•
This product should be assembled
by no less than two people
•
Drill all components where indicated
Recommended tools for assembly
•
Power drill/screwdriver
• 2mm drill bit
• Cross head screwdriver bit
•
Hammer
•
Spirit level
2022 © Rowlinson Garden Products Ltd
We constantly improve the quality of our products, occasionally
the components may differ from the components shown and are
only correct at time of printing. We reserve the right to change the
specification of our products without prior notice.
If in doubt of any aspect regarding the assembly, use or safety of your log store, please contact us:
Help Line (Normal Office Hours) 01829 261 121
Email: [email protected]
ROWLINSON GARDEN PRODUCTS LIMITED
Green Lane
Wardle Nr. Nantwich
Cheshire
CW5 6BN
www.rowgar.co.uk
6. Roof
Place the roof over the top of the back and sides. Secure in place using 4 x 63mm screws. Screw through the side of the
roof into the side panels.
5. Roof Fascia
Position the front fascia board underneath the top board and secure to the roof framing. At each end use 2 x 40mm
nails. In the middle use only 1 x 40mm nail.
It may be necessary to drill
pilot holes for all screws in
this section.
Drill
1
2
3
4
5
6
7
8
63mm
63mm
40mm
