© 2021 Rowley
®
Company. All rights reserved. R-TEC Automation
®
is a registered trademark of the Rowley
®
Company, LLC.
4
SAFETY
Incorrect installation can lead to serious injury and will void manufacturer's liability and warranty.
WARNING
CAUTION
•
Do not expose to moisture or extreme temperatures.
•
Do not allow children to play with this device.
•
Use or modification outside the scope of this instruction manual will void warranty.
•
Installation and programming to be performed by a suitably qualified installer.
•
For use within tubular shades.
•
Ensure correct crown and drive adapters are used for the intended system.
•
Keep antenna straight and clear from metal objects.
•
Do not cut the antenna.
•
Use only R-TEC Automation
®
hardware.
•
Before installation, remove any unnecessary cords and disable any equipment not needed for powered operation.
•
Ensure torque and operating time is compatible with end application.
•
Do not expose the motor to water or install in humid or damp environments.
•
Motor is to be installed in horizontal application only.
•
Do not drill into motor body.
•
The routing of cable through walls shall be protected by isolating bushes or grommets.
•
Ensure power cable and antenna are clear and protected from moving parts.
•
If cable or power connector is damaged, do not use.
IMPORTANT SAFETY INSTRUCTIONS TO BE READ PRIOR
TO OPERATION
•
It is important for the safety of persons to follow the enclosed instructions. Save these instructions for future reference.
•
Persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge
should not be allowed to use this product.
•
Keep remote controls away from children.
•
Frequently inspect for improper operation. Do not use if repair or adjustment is necessary.
•
Keep motor away from acid and alkali.
•
Do not force the motor drive.
•
Keep clear when in operation.
Do no dispose of in general waste.
Please recycle batteries and damaged electrical
products appropriately.
