Rowi Electronics 1 01 01 10002, Инструкция по эксплуатации

Страница: 16 / 18

15/60
GB
Setting up and attaching the mounting bracket
1. Selecting the installation site
IMPORTANT!
The mobile work light must be placed on a level surface with a
maximum permissible incline of 6°.
2. Adjust the angle
Release adjusting screws [Fig. 1, Pos. 7]. Select the desired angle retighten
adjustment screws [Fig. 1, Pos. 7]
3. Attaching the mounting bracket
Release the left and right adjustment screws [Fig. 1, Pos. 7]. Place the
mounting bracket between the adjustment screws and the spacers. [Fig. 3,
Pos. 14]
Fig. 3: Attaching the mounting bracket
Tighten the adjustment screws [Fig. 1, Pos. 7] on both sides. Attach to a tri-
pod or a wall with the preassembled screw insert on the mounting bracket.
Replacing the cable
DANGER!
Changing a defective cable should be carried out by an authorised
service agent. Operations such as this are extremely dangerous and
can cause electric shock.
DANGER!
Make sure that you always disconnect the mobile work light from the
mains before opening the unit.
14
15
BA AL270S SK1.indd 15 06.09.2011 11:24:39