ROWHEELS REV OWNER’S MANUAL – OPERATION AND MAINTENANCE © ROWHEELS, INC.
5
6
ROWHEELS REV OWNER’S MANUAL – OPERATION AND MAINTENANCE © ROWHEELS, INC.
LATCH ASSEMBLY
INITIAL INSTALLATION
Please refer to the previous pages to locate the
various parts of the wheel.
Attaching the Pin Latch Mechanism -
For the REV™ to function properly the torque arm
(8) must be held securely in place. The torque arm
pin (9) is held by the pin latch mechanism (11).
The pin latch mechanism is permanently mounted
to the frame by the universal frame clamp (13).
1. Begin installation by removing your standard
rear wheels and locating the seating frame tubes of
the chair. This part of the frame is below the seat
cushion of the chair and runs along the underside
of the seat cushion. This is the optimal mounting
location.
2. Engage the quick release button on your wheel
(Figure #1)
FIGURE #1
QUICK RELEASE BUTTON
11
15
14
13
12
16
ITEM NUMBER
DESCRIPTION
11
T-Handle Release
12
Pin Latch Mechanism
13
Pin Reciever Slot
14
Universal Frame Clamp
15
Frame Clamp Screws
16
Set Screw
BEFORE OPERATING YOUR REV™ WHEELSET
