ROWHEELS REV OWNER’S MANUAL – OPERATION AND MAINTENANCE © ROWHEELS, INC.
17
18
ROWHEELS REV OWNER’S MANUAL – OPERATION AND MAINTENANCE © ROWHEELS, INC.
IMPORTANT: READ CAREFUL
LY
WHAT DOES THIS LIMITED WARRANTY COVER?
ROWHEELS INC. (“ROWHEELS”) warrants this
product against defects in material or workmanship for the
original and any subsequent end user owner(s) for the time
periods as set forth below.
Under this Limited Warranty, ROWHEELS will, at its
option, (i) repair the product using new or refurbished
parts or (ii) replace the product with a new or refurbished
product. “Refurbished” means a product or part that has
been returned to its original specifications. These are your
exclusive remedies. ROWHEELS does not warrant that the
operation of the product will be uninterrupted or error-
free.
Term: One (1) year from the original date of purchase of
the product. This Limited Warranty is transferable. How-
ever, any transfer of this product does not extend the term.
A copy of the dated receipt or bill of sale from the original
end user purchase is required to determine coverage. The
purchaser must submit the fully completed Product Regis-
tration and Warranty Form to the customer service address
listed and within thirty (30) days of the date of purchase.
Product Coverage: Only the components packaged with the
product are covered. Technical assistance and labor is not
covered. When a product or part is exchanged, the original
item becomes ROWHEELS’ property.
Any replacement product provided under this limited
warranty may vary in the color and/or cosmetic design from
the original product.
WHAT IS NOT COVERED BY THIS LIMITED WARRANTY?
This limited warranty does not apply if the product is used
with products or services that are not compatible with
Rowheels or if the wheel has been modified or tampered
TIRE AND TUBE REPLACEMENT
It is recommended that replacement of all tires be done by
a qualified technician. Improper installation of pneumatic
tires may cause the tire to leak or pop under pressure.
Proceed with caution.
Removing and Installing Tire and Tube
1. If not already deflated, deflate the tube by depressing the
valve.
2. Place a plastic tire tool under the bead of the tire and
begin to lift the bead over the edge of the rim. It may be
necessary to use two levers to accomplish this, depending
on the tire.
3. Slide the tire lever along the rim until one bead of the
tire is on the outside of the rim.
4. The tube can now be removed by pushing the valve into
the rim, grabbing it from the other side and pulling out.
5. If replacing a tire, remove the old tire completely from
the rim, then install one side of the bead of the new tire.
6. Lightly inflate the new tube and insert the valve stem
into the valve hole in the rim and work the tube back into
the tire. Make sure that the tire is free from holes and
foreign objects by inspecting the tire closely.
7. Begin to hook the second bead of the tire into the rim,
making sure that it hooks completely into the rim. This
may again require the use of a second plastic tire lever.
8. When both beads are hooked on to the rim make
sure that the tube is not pinched between the rim and
the tire. It is then safe to inflate the tube to the pressure
recommended by the tire manufacturer.
LIMITED WARRANTY INFORMATION
