Rowe Scan 450i 24 inch KIT 40, Руководство по эксплуатации

Страница: 29 / 146

28
2.11 Calibration of Scanner
Now, the scanner needs to be calibrated to
obtain perfect scan results.
For this purpose, place the supplied calibration
chart in the paper feed of the scanner.
The calibration chart has to be placed
with the printed side facing up and with
the depicted arrow facing the front
because the calibration process cannot
be effected correctly otherwise.
Press
"Next“
afterwards. The calibration process
is started and will take some time. Any
remaining time is depicted.
Should the wizard detect soiling and/or
dust during the calibration process, a
message pops up. In this case, check
and clean the glass plate. Afterwards,
you can repeat the process.
Please handle the calibration chart with
care. After calibration put it back into
the provided cardboard box.
After completion of calibration, the scanner is in
working order and ready for use. For this
purpose, read chapter
"Simple Scan“ .
Figure 2.20: Calibration of scanner
In general, the Scan 450i software on the supplied CD-ROM is the most recent
version. However, it may also occur that a more recent version is already available.
The latter can now be downloaded and installed if you intend to do so. Press the
Update button in ConfigManager (see Chapter 6). For this purpose, read Chapter 6.9.