Rowe HASCP, Руководство по эксплуатации

Страница: 28 / 79

28
5 Preparing for a Deployment
RTI recommends the following checklist that may help the user towards a successful deployment.
Structural Integrity – The structural integrity of cables and connectors are also important, be sure to there
are no cuts or cracks in the cable or connectors. It is important to make sure that when reassembling the
system that the nuts and bolts are tightened sufficiently. In addition, It is essential that all O-rings are
properly greased and seated in the groove found in the transducer head.
Cable Connections – Be certain that all the cables are properly connected as outlined in Section 2. When
using a wet-mateable connection, be sure to first mate the connectors completely and then tighten the
locking sleeve. This is the proper procedure for wet-mateable connections (Do not connect the wet-
mateable connectors partially and then use the locking sleeve to tighten – this will not provide an
adequate seal for the connector).
Power – Make sure that the power connections are properly connected.