Rowe HASCP, Руководство по эксплуатации

Страница: 16 / 79

16
a. Shows status and gives error messages that occur during
communication with the HASCP.
6. Command List Text Box
a. Displays the current command set.
3.7 Horizontal Profile
i. Click the Horizontal Profile TAB near the top center-left of the software window.
Refer to Figure 8 and Figure 9.
ii. Playback
1. Select File
a. Allows selection of previously recorded/saved HADCP data
file.
2. > Playback
b. Clicking > will cause the software to playback through the
selected file
3. || Pause
c. Clicking || will pause the Play function. Clicking > will
resume playback.
4.
– Step Back one ensemble
d. When playback is paused the user can click back one
ensemble at a time. The ensemble buffer is limited to how
many ensembles can be stepped back during a pause.
5. + Step forward one ensemble
e. When playback is paused the user click forward one
ensemble at a time.
6. Stop
f. Stops playback and close the selected playback file.
iii. View
1. Graph
a. Selects a graphical view of the profile data.
2. Text
b. Selects a text column view of the profile data.
3. Font/Line Size
iv. Vel Data (Broadband 2 beam Janus)
1. Beam
a. Selects the beam velocity data to be displayed.
2. Inst
b. Selects the XY velocity data to be displayed.
3. Amp
c. Selects the beam amplitude data to be displayed.
4. Cor
d. Selects the beam correlation data to be displayed.
5. Pings
e. Selects the number of good pings for each beam collected
during the ensemble to be displayed. Shown on the text
page.
v. Vel Stats (Broadband 2 beam Janus)
1. Beam
a. Selects the average beam velocity data to be displayed.
2. Inst