Rowe HASCP, Руководство по эксплуатации

Страница: 12 / 79

12
b. To START the HASCP click START. The HASCP will begin pinging
and outputting ensemble data beginning with ensemble number 1.
c. If you want to send a predetermined set of commands to the HASCP
click Deploy and follow the instructions to select the command text file.
c. Set HASCP Time
i. Click either GMT or Local. Be sure the HASCP is STOPPED before setting
the time or the next ping time might be delayed for many hours.
d. File Transfer
i. Click Upload to transfer a file from the PC to the HASCP SD card.
ii. Click Download to transfer a file from the HASCP to the PC.
1. The Text Box at the bottom right of the window must contain the name
of the desired file to transfer prior to clicking Download.
iii. Click Erase to delete a file from the HASCP SD card.
2. The Text Box at the bottom right of the window must contain the name
of the desired file to erase prior to clicking Erase.
iv. If you wish to cancel the transfer click Cancel Transfer.
e. Record
i. Clicking Record will turn on/off the HASCP output data recording on the PC.
1. The text box to the right of the Record button show the number of bytes
recorded along with a flashing ON/on. Clicking Record a second time
will turn of data recording.
2. Recorded data is stored at “C:\RoweTechHASCP\Capture”. File size is
limited to 10 Mbytes. When the 10MB limit is reached the file name will
increment by one and recording will continue
f. Combine Files
i. If you desire to merge files into a single larger file click Merge and follow the
instructions.
g. Clear Terminal
i. To clear the terminal screen click Clear Terminal near the bottom of the
window.
h. HASCP Commands
i. To send single commands to the HASCP type the command in the combo text
box at the bottom left then click Send. The combo text box remembers the
commands if you press Enter instead of clicking Send.
3.4 Deploy
a. Click the Deploy TAB near the top left of the software window. Refer to Figure 7.
b. Deployment Summary
i. Ensembles
1. Total number of ensembles that will be output/recorded during the
deployment.
ii. Min Interval (s)
1. Minimum time between ensembles to maintain ping timing.
iii. Data Bytes
2. Number of bytes that will be output/recorded during the deployment
c. Deployment Information
i. Days
1. The expected number of days the deployment will last
ii. Ensemble Interval (s)