Roverpet
20 Kiji Dava Circle Prescott, Arizona 86301
1-800-658-5925
Page 1 of 3
Roverpet Cat Play Center #H3-CPC Assembly Instructions
Thank you for purchasing your new Roverpet model
#H3-CPC
.
These instructions will explain how to assemble the Cat Play Center.
STEP1:
Roverpet
#H3-CPC
Cat Play Center includes:
(1) Play Center Module
(2) Long PVC Legs
(2) Short PVC Arms
(4) PVC Uprights
(2) Long Crossbars
(4) Short Crossbars
NOTE: This unit is assembled UPSIDE-DOWN
If desired, to reduce the squeaking/friction caused by product on product place a thin layer of Vaseline on the
connection points.
STEP 2:
Install the Roverpet Cat
Play Center Module’s connector rings over both ends of one Short PVC Arm.
Install the Roverpet Cat Play Center Module with the furry side of the pads
FACING DOWN
, as well as,
making sure the crossbar holes are facing toward the Module.
STEP 3:
Insert both Long Crossbars into the crossbar holes of an Arm.
Note: When installing the Crossbars, be sure to install them in between the Module’s two connector
rings