Roverpet
20 Kiji Dava Circle Prescott, Arizona 86301
800-658-5925
Page 1 of 3
Roverpet #66PR
– 6’x 6’ Puppy Rail Assembly Instructions
Inventory List for The Roverpet #66PR Puppy Rail System:
(2)
#PR72LB
72” Long Support Bar
(2) #72CB
72” Long Crossbar
(2) #PRS66
Crossbar Support and
(6)
2”, 3”, 4”, 5”, 6” or 8” high legs (depending on style of Roverpet Puppy Rail System ordered)
Assembly Procedure
Special Notes:
If your Roverpet
6’x6’ whelping box consists of a door panel, it needs to be configured with the door located on
the right or center of the whelping box side to allow door hinge clearance.
Assembly of the Roverpet Puppy Rail System needs to be done outside of your existing Roverpet whelping box, than installed
into the whelping box once fully assembled.
1.) Unpack contents of shipping carton and compare to inventory list above.
2.) Install
(4)
legs of the Roverpet Puppy Rail System into the 4 small leg whole locations on both #PR72LB.
