Adjustable Hinge Jig
Adjustable Hinge Jig
Adjustable
Adjustable
5
0
m
m
-
1
2
7
m
m
(2
”
-
5
”)
6.5 - 35mm
Hinge sizes possible
n
Three adjustable hinge apertures.
n
For hinges 50mm(2”) - 127mm(5”) x 6.5mm - 35mm.
n
Comes in two parts for easy storage.
n
Based on a 2 metre door, the hinge positions are 6” from top, 9” from base, and middle.
n
End datum stop to control the 3mm gap between the top of the door and frame.
Other Equipment required:-
n
12mm diameter straight cutter.
n
16mm diameter guide bush.
n
At least two bradawls to secure jig to door/frame.
n
Philips screwdriver to adjust hinge apertures.
Instruction Leaflet
Instruction Leaflet
A sliding plate allows hinge
length adjustment.
Engraved marking allows
easy hinge measurement
and setting.
The depth of the
hinge can easily be
set. The hinge sits
in place within the jig
and the depth datum
is adjusted to suit.
The depth datum
butts up against the
door or frame to
control the depth of
the hinge.
A datum end stop
provides accurate
hinge positioning on
the door and frame.
Connecting Plate
