Page 8 of 15
Loading the Grease Gun
Removing Cartridges
1. Pull out the plunger handle (17) to its maximum distance and lock it in place.
2. Remove the grease gun head (13) by turning it counter-clockwise.
3. Remove any empty cartridges.
Always follow the steps listed previously when preparing to load your grease gun. There are two ways
to load this grease gun:
•
Cartridge Loading
•
Bulk Fill
Cartridge Loading
1. Completely draw back the plunger handle (17) and lock it in place.
⚠
WARNING
•
Grease or empty cartridge in barrel is under pressure from the internal spring, be alert when
removing head of the barrel.
•
Do not apply excessive torque or over-tighten the grease gun head as this will apply undue stress
to the die cast outlet and may cause it to fracture.
