Page 10 of 16
3. Fill the grease gun barrel (1) with grease using a spatula or grease scoop.
4. Reassemble the grease gun head (2) to the grease gun barrel (1) by turning it clockwise.
Filler Pump Loading
1. Fully draw back the plunger handle (6) and lock it in place.
2. Insert the bulk loader valve (8) into the filler pump socket.
3. Operate the filler pump to fill the grease gun barrel (1).
4. Disconnect the grease gun from the filler pump. The grease gun is ready to use.
Removing Trapped Air
After filling the grease gun, remove any trapped air by following these steps:
1. After filling the grease gun barrel (1) with grease (using any of the previously mentioned methods)
and reassembling the gun, keep the barrel at least 2-3 turns open.
2. Release the plunger rod (7). Push down on the plunger handle (6).
3. Move the plunger rod (7) forward and backward to remove any trapped air pockets.
4. Tighten the grease gun head (2) to the grease gun barrel (1). The grease gun is now ready to
use.
Lever Grease Gun with Air Release Valve
1. After filling the grease gun barrel (1) with grease (previously mentioned), reassemble the gun.
2. Tap the manual air release valve (9) to release the trapped air.
